Help with the T5

    Share
    avatar
    LukeKenworthy

    Posts : 27
    Join date : 2012-02-14
    Age : 23
    Location : Southampton

    Help with the T5

    Post by LukeKenworthy on Tue Sep 11, 2012 7:40 am

    Alright lads, just a question about my bike, my flyshield on the t5 mk1 is broken and im trying to take it out,it doesn't seem to slide out as somebody on here suggested? (new to the scooter scene)
    avatar
    Wally
    Site Admin
    Site Admin

    Posts : 2092
    Join date : 2011-07-19
    Age : 28
    Location : Yoghurt County, UK

    Re: Help with the T5

    Post by Wally on Tue Sep 11, 2012 7:47 am

    You need to take the headset top off, disconnect the speedo and wiring. Then There's some screws underneath which hold the speedo surround onto the headset top. Take these out and the screen fits in a groove between the two parts.


    ____________________
    ____________________

    “Some people will tell you that slow is good – but I’m here to tell you that fast is better. I’ve always believed this, in spite of the trouble it’s caused me. Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba…”
    avatar
    LukeKenworthy

    Posts : 27
    Join date : 2012-02-14
    Age : 23
    Location : Southampton

    Re: Help with the T5

    Post by LukeKenworthy on Tue Sep 11, 2012 7:50 am

    cheers, difficult to do? will i have to re-wire the speedo cables ect or just unclip and re clip them?
    avatar
    Wally
    Site Admin
    Site Admin

    Posts : 2092
    Join date : 2011-07-19
    Age : 28
    Location : Yoghurt County, UK

    Re: Help with the T5

    Post by Wally on Tue Sep 11, 2012 7:54 am

    Nah, easy job, take 5 minutes if that. Just unlclip the speedo and the two multi connectors. It'll make more sense when you go to do it as it's a bit difficult to explain.


    ____________________
    ____________________

    “Some people will tell you that slow is good – but I’m here to tell you that fast is better. I’ve always believed this, in spite of the trouble it’s caused me. Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba…”
    avatar
    NorthernJordan
    Site Admin
    Site Admin

    Posts : 3844
    Join date : 2011-07-20
    Age : 24
    Location : Cumbria

    Re: Help with the T5

    Post by NorthernJordan on Tue Sep 11, 2012 8:28 am

    Just be careful when unclipping the headset top, so you don't damage any of the wiring or cables. But its an easy job.


    ____________________
    Ready Steady Go Scooter Club - Barrow-In-Furness

    LCGB Member - 5226
    avatar
    josh

    Posts : 794
    Join date : 2011-09-12
    Age : 23
    Location : liverpool

    Re: Help with the T5

    Post by josh on Wed Sep 12, 2012 6:50 pm

    as others said just simply undu the headset slowely lift headset up and be carefull not to pull to hard just nice and gentle

    Sponsored content

    Re: Help with the T5

    Post by Sponsored content


      Current date/time is Fri Jul 21, 2017 5:45 am