new piston

    Share
    avatar
    liammodsmith

    Posts : 253
    Join date : 2011-07-21
    Age : 22
    Location : lockierbie

    new piston

    Post by liammodsmith on Tue Dec 25, 2012 5:36 am

    am going to be putting a 150 on my scooter i know i will need gaskets but wat else will i need to do it
    avatar
    ttscshaggy

    Posts : 1095
    Join date : 2011-07-23
    Age : 26
    Location : Swadlincote , Derbyshire

    Re: new piston

    Post by ttscshaggy on Tue Dec 25, 2012 6:24 am

    The jetting will need slightly raising.
    The ignition timing might need a slight alter. Im unsure of standard timings on px's
    avatar
    Watson76

    Posts : 33
    Join date : 2012-12-06
    Age : 27
    Location : Cleethorpes

    Re: new piston

    Post by Watson76 on Tue Dec 25, 2012 11:00 am

    Almost sure the timing doesn't need touching if I remember right. Main should be around 102ish with exhaust, maybe higher if any breathing mods been done.
    avatar
    Wally
    Site Admin
    Site Admin

    Posts : 2092
    Join date : 2011-07-19
    Age : 28
    Location : Yoghurt County, UK

    Re: new piston

    Post by Wally on Tue Dec 25, 2012 11:42 am

    Timing should be about right on the 125 setting, though you should have it strobed to get it right. Same goes for the cylinder head as well, 125 will do, but you should have a 150 one to get it right.

    Jetting wise, as Watson says 102-106 on the main will see you right


    ____________________
    ____________________

    “Some people will tell you that slow is good – but I’m here to tell you that fast is better. I’ve always believed this, in spite of the trouble it’s caused me. Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba…”

    Sponsored content

    Re: new piston

    Post by Sponsored content


      Current date/time is Mon Nov 20, 2017 5:05 pm